How To Avoid Mistakes When Using Laser Engraving

With the rapid and continuous advancement of technology, production processes have become much more efficient and innovative. As a result, production costs have lowered by a big percentage, when compared to the previous decades. One of the technological advancements that have benefitted many production processes is the laser engraver. The laser engraving machine has cut down production time by hours, as it takes out the human factor that is prone to make mistakes and inefficiencies. Moreover, this technology can be purchased at reasonable rates, making it more accessible to the masses. However, these machines are quite delicate and can become dangerous, especially if handled by an untrained individual. Here are just some ways to avoid certain mistakes when using the machine;

Know Your Material

One of the most important things to consider when using the machine is the material used for laser engraving. When taking some of the common materials used, which is fabric, they often are different to one another, as they can be of different thickness, density and can be made up of different elements. It is important for many a commercial engraving company that often handles this type of job in bulk to take these features into account, so as to set the machine accordingly. No consideration of these elements would mean detrimental impacts, such as the damage of the material, possible damage of the material and sometimes a fatal reaction that could lead to a fire hazard.

The Variability of Glass

Apart from fabric, glass has also become a major type of material that produces variable results when it undergoes laser engraving. Unlike fabric though, glass is often made up of the same compounds, however, what can differ from certain glasses is the way it has been tempered. It is this tempering that result in different results when laser engraving, as the strength of the glass differs from one another. In other words, the laser engraving machine should be configured in a manner that would not fracture the glass, however, should be strong enough to make the particular design on the glass clearly. Having the machine on a powerful setting could result in the shattering of the glass if it is too weak, which could also lead to the damage of the machine too.

The Difference in Wood

Considered to be one of the most laser friendly materials out there, many companies who produce wood products use a laser engraving machine, so as to beautify the product and to give it a distinct mark of recognition. The reason for the material to be laser friendly is the fact that it could be easily cut, and even if a mistake does occur, it could be easily rectified. However, it is important to note that wood is prone to flammability, should it exposed to high temperature. This is important for any laser engraving machine configure, since these machines are high powered instruments that use heat to do its job. The wrong setting could literally make the entire product go up in flames as a result. In other words, it is always important to consider what type of machine is used and what configuration it is set to.

Laser engraving then can be done quite easily in the modern day, and has become a commercial activity that has resulted in a big industry. However, the operation of a machine can be quite tricky and dangerous; therefore these tips could help mitigate mistakes caused.

Leave a Reply

Your email address will not be published.